THE DETERMINATION OF BENDING RADIUS OF THE FLEXIBLE SCREW CONVEYOR MADE OF SECTIONAL ELEMENTS

О. L. Lyashuk, V. М. Klendiy, Т. D. Navrotska, М. R. Konevich

Abstract


Mechanisms with screw devices are widely used in all fields of the economy, especially flexible screw conveyors with sectional elements for the transportation of granular materials during transportation on curved roads. Nowadays the strategies for improving the section screw working bodies in order to enhance their operational indicators are up-to-date issues, as the shaftless screw working bodies, despite the simplicity of the design, do not provide appropriate performance or have low operational life. The study deals with the development of flexible screw working body model of sectional elements. The model of flexible screw conveyor working body of sectional elements can be used in various sectors of the food and processing industry, agriculture, technological processes for mechanized loading of mineral fertilizers, seed material, etc. The scheme for determining the relationship between structural parameters of flexible shaft and its bending radius is given in the study. The analytical dependences for determination of bending radius of flexible screw conveyor section according to design and energy-power parameters during transportation are identified in the paper. The graphic dependences of changes in the bending radius of the conveyor flexible screw working body from the structural parameters of sectional elements are constructed. The obtained results make it possible to confirm the minimum permissible bending radius of the technological line Rк., which allows to increase the minimum bending radius at 20 ... 30% to ensure guaranteed non-rotation sections, that would eliminate the possibility of accidents and increase the durability of the operation of the proposed working body

Keywords


autopsy flexible screw working body; bending radius; technological possibilities

References


Gevko B.M., & Rogatinskii, R.M. (1989). Vintovye podayushchie mekhanizmy sel'skokhozyaistvennykh mashin [Screw feed mechanisms of agricultural machinery]. Lviv: Izd-vo pri Lvov. un-te. [in Rus.]

Hevko, B.M., Rohatynskyi, R.M., Rozum, R.I., Klendii, M.B., Klendii, O.M., & Vitrovyi, A.O. (2018). Pіdvishchennya tekhnologіchnogo rіvnya protsesіv zavantazhennya ta perevantazhennya materіalіv u gvintovikh konveєrakh: monografіya [Improving the technological level of the process of loading and reloading materials in screw conveyors: a monograph]. Ternopіl: Osadcha Yu.V. [in Ukr.]

Rohatynskyi, R.M., Hevko, I.B., & Diachun, A.Ie. (2014). Naukovo-prikladnі osnovi stvorennya gvintovikh transportno-tekhnologіchnikh mekhanіzmіv [Scientific and applied foundations of the creation of screw transport and technological mechanisms]. Ternopіl: TNTU іmenі Іvana Pulyuya. [in Ukr.]

Hevko, Iv.B., Lyashuk, O.L., Leshchuk, R.Y., Rogatinska, L.R., & Melnychuk, A.L. (2016). Іnvestigation of the radius of bending for flexible screw sectional conveyers. INMATEH «Agricultural Engineering», vol 48, is. 1, 35-43.

Owen, P.J., & Cleary, P.W. (2009). Prediction of screw conveyor performance using the Discrete Element Method (DEM). Powder Technology, 193(3), 274-288.

Hu, G., Chen, J., Jian, B., Wan, H., Liu, L. (2010). Modeling and simulation of transportation system of screw conveyors by the discrete element method. International Conference on Mechanic Automation and Control Engineering, MACE2010, Article number 5536244, 927-930;

Zareiforoush, H., Komarizadeh, M.H., & Alizadeh, M.R. (July, 2010). Effect of crop-screw parameters on rough rice grain damage in handling with a horizontal screw conveyor. Journal of Food, Agriculture and Environment Volume 8, Issue 3-4 PART 1, 494-499.

Grigoriev, A.M. (1972). Vintovye konveery [Screw conveyors]. Moskow: Mashinostroenie. [in Russ.]

Gevko B.M., Lyashuk O.L., Gevko І.B., Dragan A.P., & Novosad І.Ya. (2008). Tekhnologіchnі osnovi formoutvorennya spetsіalnikh profіlnikh gvintovikh detalei [Technological basis for the formation of special shaped screw parts]. Ternopіl: SMP “Taip”. [in Russ.]

Gevko, І.B., Lyashuk, O.L., Rogatinska, L.R., Zolotuy, R.Z., & Lyubachivskyy, R.O. (2013). Investigation of the radius of bending for flexible screw sectional conveyer. International symposium: ISB-INMA TEH’2013. «Agricultural and Mechanical Engineering » 2013, 175-182.

Loveikin, V., Chovniuk, Yu., & Kulyk, V. (2012). Optimizatsiia rezhimov kolebanii zernovykh smesei pri nalichii sukhogo treniia [Optimization of vibration modes of grain mixtures in the presence of dry friction]. Motrol – Motoryzacja I energetyka rolnictva, 14(3), 140-149. [in Russ.]

Lytvynov, O. (2006). Towards the dynamic calculation of machines. Motrol, 8a, 210-223


GOST Style Citations


Гевко Б.М., Рогатинський Р.М. Винтовые подающие механизмы сельскохозяйственных машин. Львов : Изд-во при Львов. ун-те, 1989. 176 с.

Гевко Б.М., Рогатинський Р.М., Розум Р.І., Клендій М.Б., Клендій О.М., Вітровий А.О. Підвищення технологічного рівня процесів завантаження та перевантаження матеріалів у гвинтових конвеєрах: монографія . Тернопіль : Осадца Ю.В., 2018. 180 с.

Рогатинський Р.М., Гевко І.Б., Дячун А.Є. Науково-прикладні основи створення гвинтових транспортно-технологічних механізмів. Тернопіль : ТНТУ імені Івана Пулюя, 2014. 278 с.

Hevko, Iv.B., Lyashuk, O.L., Leshchuk, R.Y., Rogatinska, L.R., & Melnychuk, A.L. (2016). Іnvestigation of the radius of bending for flexible screw sectional conveyers. INMATEH «Agricultural Engineering», vol. 48, no. 1, 35-43.

Owen, P.J. & Cleary, P.W. (2009). Prediction of screw conveyor performance using the Discrete Element Method (DEM). Powder Technology, 193(3), 274-288.

Hu, G., Chen, J., Jian, B., Wan, H., & Liu, L. (2010). Modeling and simulation of transportation system of screw conveyors by the discrete element method. International Conference on Mechanic Automation and Control Engineering, MACE2010, Article number 5536244, 927-930;

Zareiforoush, H., Komarizadeh, M.H., Alizadeh, M.R. Effect of crop-screw parameters on rough rice grain damage in handling with a horizontal screw conveyor. Journal of Food, Agriculture and Environment. July, 2010. Volume 8, Issue 3-4 PART 1. PP. 494-499.

Григорьев А.М. Винтовые конвееры. Москва : Машиностроение. 1972. 286 с.

Гевко Б.М., Ляшук О.Л. , Гевко І.Б. , Драган А.П., Новосад І.Я. Технологічні основи формоутворення спеціальних профільних гвинтових деталей. Тернопіль : СМП “Тайп”, 2008 367 с.

Gevko І.B., Lyashuk O.L., Rogatinska L.R., Zolotuy R.Z., Lyubachivskyy R.O. Investigation of the radius of bending for flexible screw sectional conveyer. International symposium: ISB-INMA TEH’2013. «Agricultural and Mechanical Engineering», 2013. PР. 175-182.

Ловейкин В., Човнюк Ю., Кулык В. Оптимизация режимов колебаний зерновых смесей при наличии сухого трения. Motrol – Motoryzacja I energetyka rolnictva. Lublin, Tom 14, vоl.3 2012. РР. 140-149

Lytvynov O. Towards the dynamic calculation of machines. Motrol. 2006. Tom 8A PP. 210-223.**





Copyright (c) 2019 PODILIAN BULLETIN: AGRICULTURE, ENGINEERING, ECONOMICS

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.


Ліцензія Creative CommonsState Agrarian and Egineering University in Podilya