ANALYSIS OF THERMAL CHARACTERISTICS OF AVALANCHE - TRANSIT DIODE IN TERMS OF SHORT PULSES
Keywords:
thermal conductivity, pulse width, duty cycle, thermal resistance, diode pulsed power generatorsAbstract
Determination of inaccessible energy characteristics of a pulsed diode oscillator of the value of the pulse width is shown. Microwave power level generated by the ATD, is mainly determined by four parameters: Unp breakdown voltage, operating current density J0, the resistance Rs of the diode losses and the area of the p-n junction S. J0 operating current density is limited by the maximum allowable power dissipation per unit area of the diode and is determined by the temperature of the p-n junction, heat dissipation efficiency and mode of operation. Ability to create high-power pulsed radiation sources depend on the availability of relevant semiconductor devices and summing circuit. The estimation of the permissible values of the pulsed power generator by changing the active semiconductor diode temperature during the pulse duration. To fulfill the requirements of coherence and stability of amplitude and phase settings in the pulse mode using an external sync pulse generators highly stable continuous signal. As the input source using ATD generator, with a stabilizing high-Q cavity resonator transmission type. Determination of achievable energy characteristics of the generator requires a knowledge of the temperature of the diode mode, depending on its geometry and parameters of pulsed power mode. The analysis showed that for the destruction of biological pest root fruit crops needed pulse generators with output power up to 1.5 kW. The method of calculation allows for specifically shaped structure and heat settings determine the maximum allowable value of current density and pulse power supply for a pulseReferences
Kozak, Alexandr, Gordyjchuk, Yvan, Semenishina, Irina, & Vilchinska, Dariya (2015). Analiz procesa vozdeystviya elektromagnitnih impulsnuh signaiov na biologicheskih vrediteley nahodyachsya v pochve [Analysis of the effects of pulsed electromagnetic signals on biological pests in the soil]. MOTROL. Commission of Motorization and energetics in agriculture, 17(1), 45–50.
Potapskij, P.V., Garasimchuk, I.D., Kozak, A.V., & Mihajlova, L.N. (2015). Teoreticheskoe obosnovanie sozdanija impul'snogo generatora dlja povyshenija immuniteta zhivotnyh [A theoretical study on the development of the pulse generator to enhance animal immunity]. MOTROL. Motorization and power industry in agriculture. Lublin, Vol. 17, 5, 62-66.
Yasinskiy, V. К. (1975). Teplovoy regim impulsnih generatornih diodov [Heat mode pulse generator diodes]. Radyotekhnyka y эlektronyka, 1(20), 224–226.
Kasatkin, L.V., & Chayka, V.Е. (2006). Poluprovodnikovie ustroystva v milimitrovom diapazone dlin voln [Semiconductor devices in millimeter wavelength range]. Sevastopol: Izdatelstvo Veber [Publisher Weber].
Таgеr А.S. (1981). К raschetu teplovuh harakteristik poluprovodnikovuh struktur v regime korotkih impulsov [Calculation of thermal characteristics of semiconductor structures in the short pulse mode]. Elektronika SVCH [Series 1. Microwave Electronics], 5, 3–7.
Hodnevich, А.D. (1974). Zavisimost vihodnoy mochnosti GLPD ot emkosti p-n perehoda [output ATDG dependence on the capacity of p-n transition]. Seriya 1. Elektronika SVCH [Series 1. Microwave Electronics], 2, 34–44.
Gorbachov, А.V., & Kasatkin, L.V. (1982). Kaskadnoe sumirovanie moschnostey LPD v regime vneshney sinxronizacii [Cascade summation LPD capacity in external synchronization mode]. Elektronnaya tehnika [Electronic Engineering], 10, 22–27.
Published
How to Cite
Issue
Section
License
Copyright (c) 2019 Podilian Bulletin: Agriculture, Engineering, Economics
![Creative Commons License](http://i.creativecommons.org/l/by-nc/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors contributing to Public Policy and Administration agree to publish their articles under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) License, allowing third parties to share their work (copy, distribute, transmit) and to adapt it, under the condition that the authors are given credit, and that in the event of reuse or distribution, the terms of this licence are made clear.