THE RESOURCE INCREASING OF ECCENTRIC PERSON MECHANISM OF MACHINES

Authors

  • В. С. Бончик State Agrarian and Engineering University in Podilya,
  • П. П. Федірко State Agrarian and Engineering University in Podilya,
  • В. Г. Мигаль State Agrarian and Engineering University in Podilya,

Keywords:

eccentric person mechanism, machine, ploughshare, productivity

Abstract

On this time in the technical providing of agroindustrial complex of Ukraine a considerable role is taken repairs and modernization of present technique of both domestic and foreign production. Purpose of this study is to increase the longevity of resource of eccentric person mechanism of of machines with the use of new technological decisions in the process of making and repair. The results of theoretical and experimental researches were realized in the repair production of Ukraine by development and introduction of increasing the technology resource of eccentric person mechanism in the digging up aggregates of domestic machines. The schemes of strengthening the steel layer are proposed. The technological process of proceeding in the billows of eccentric persons and the modern requirements of repair products are identified

Author Biographies

В. С. Бончик, State Agrarian and Engineering University in Podilya

PhD., Associate Professor Department of repair of machines and power equipment Engineering faculty

П. П. Федірко, State Agrarian and Engineering University in Podilya

PhD., Associate Professor Department of repair of machines and power equipment Engineering faculty

В. Г. Мигаль, State Agrarian and Engineering University in Podilya

Senior Lecturer Department of repair of machines and power equipment Engineering faculty

References

Pohorilyi, L., Reva, D. Smakouz, H. (1997). Buriakozbyralna tekhnika: kontseptsiia ta napriamy suchasnoho rozvytku i prohnoz na perspektyvu [Sugar beet harvesting equipment: the concept and direction of modern development and the future outlook]. Tekhnika APK [AIC equipment], 2, 14–18.

Bulhakov, V. M., Voitiuk, D. H., & Linnyk, M. K. (1997). Stan i perspektyvy rozvytku buriakozbyralnoi tekhniky v Ukraini [Status and prospects of development of sugar beet harvesting equipment in Ukraine]. Visnyk ahrarnoi nauky [Agricultural Science Bulletin], 9, 57–60.

Prianyk, H. M. (1992). Pro efektyvnyi sposib vykopuvannia tsukrovykh buriakiv [On an efficient method of digging up sugar beet]. Mekhanizatsiia silskoho hospodarstva [Mechanization of Agriculture], 10, 29–30.

Poriadok rozroblennia, pohodzhennia i zatverdzhennia tekhnolohichnoi dokumentatsii na vidnovlennia detalei silskohospodarskoi tekhniky: SOU 29.3–37–186:2004 (Standart orhanizatsii Ukrainy) (2005).

Tylkin, M.A. (1991). Spravochnik termista remontnoj sluzhby [Directory treater repair service]. Moskow : Metallurgija.

Published

2016-02-29

How to Cite

Бончик, В. С., Федірко, П. П., & Мигаль, В. Г. (2016). THE RESOURCE INCREASING OF ECCENTRIC PERSON MECHANISM OF MACHINES. Podilian Bulletin: Agriculture, Engineering, Economics, 2(24), 14–18. Retrieved from http://pb.pdatu.edu.ua/article/view/136945